In this work, the magnetic and transport properties of Fe/SiO₂/Ni and Fe/SiO₂/Co multilayers grown on Si/SiO₂ substrates have been studied. The samples have been prepared by two-stage deposition process. In the first stage, Fe layer and SiO₂ interlayer of both samples are grown by ion beam deposition technique at room temperature. Then the samples are taken out to ambient atmosphere and loaded into a pulse laser deposition (PLD) chamber. Prior to the deposition of top layer, the samples are cleaned by annealing at 150 °C. In the second stage, Ni (or Co) layer is prepared by PLD technique at room temperature. The thickness of deposited layers has been measured by Rutherford back scattering (RBS). Magnetic properties of ferromagnetic bilayers have been investigated by room-temperature ferromagnetic resonance (FMR) and vibrating sample magnetometer (VSM) techniques. Standard four-point magneto-transport measurements at various temperatures have been performed. Two-step switching in the in-plane hysteresis loops of Fe/SiO₂/Ni and Fe/SiO₂/Co samples is observed. A crossing in the middle of hysteresis loops of both samples points to a weak antiferromagnetic interaction between the magnetic layers of the stacks. Saturation magnetization values have been obtained from the VSM measurements of samples with DC magnetic field perpendicular to the films surface. Magneto-transport measurements have shown the predominant contribution of anisotropic magnetic resistance both at room and low temperatures. FMR studies of Fe/SiO₂/Ni and Fe/SiO₂/Co samples have revealed additional non-uniform (surface and bulk SWR) modes, which behavior has been explained in the framework of the surface inhomogeneity model. An origin of the antiferromagnetic interaction has been discussed.

https://doi.org/10.1007/s00723-016-0849-6

Citation:

Ay, F., Rameev, B.Z., Basaran, A.C. et al. Appl Magn Reson (2017) 48: 85. https://doi.org/10.1007/s00723-016-0849-6